| AS-4015/U |
|
| Physical
Dimensions |
|
| Height |
198
inches |
| Width |
11
inches at base, tapering |
| Depth |
11
inches at base, tapering |
| Weight |
172.5
lbs |
| Operating
Temperature |
Unavailable |
| Wind |
Unavailable |
|
|
| Frequency
Range |
8
to 30 MHz
|
| Input
Impedance |
50
ohms |
| VSWR |
>
2:1 |
| Polarization |
Vertical |
| RF
Power Rating |
5
kilowatts |
| Gain |
Unavailable |
| Feed
Type |
Unavailable |
| Input
Connector |
Unavailable |
|
|
Description:
The AS-4015/U is a 16 foot whip antenna designed for general
purpose use with military communications equipment. It is
particularly suitable for prolonged installation in
shipboard marine environments and can be operated in a
vertical, tilted or horizontal position in such locations as
the deck edges of an aircraft carrier.
The antenna consists of
an aluminum radiating element, a fiberglass base insulator
and a base mounting flange. The radiator is fabricated in
two sections, square in cross section, which taper from 11
inches at the base to 7 inches at the top. There is a top
cap.
The base insulator
consists of four 1/4 inch thick epoxy fiberglass panels
attached to the bottom of the radiator and reinforced by
angle sections along each corner. The insulator electrically
isolates and physically supports the aluminum whip above the
mounting base.
The base mounting flange
is used to bolt the antenna to a foundation surface. A
flange of either steel or aluminum can be provided, to suit
the installation requirements.
Antenna AS-4015/U can be
used singly for general receiving or transmitting
applications. It is also used as a basic component in
assembling the Antenna Group OE-213/U for broadband 10-30
MHz purposes. |
