| NT-66095 |
|
| Physical
Dimensions |
|
| Height |
46
- 1/2 inches |
| Width |
24
- 1/4 inches |
| Depth |
4
- 1/2 inches |
| Operating
Temperature |
-32
C to +52 C |
|
|
| Frequency
Range |
Fixed
dipole - operating frequency 135 MHz |
| Input
Impedance |
50
ohms |
| VSWR |
VSWR
will vary depending on the percentage that the
operating frequency is removed from the resonant
frequency of the antenna. |
| Polarization |
Vertical |
| RF Power
Rating |
250
watts (average) |
| Power
Requirement |
None |
| Feed
Type |
Unbalanced,
coaxial cable |
| Input
Connector |
Type
N |
|
|
Description:
The NT-66095 is a fixed half-wave vertical dipole. The lower
section of the dipole is grounded to the antenna support
housing. The antenna contains a concentric two-step matching
section to provide a match to a 50 ohm transmission line.
This antenna may be used with any transmitting and/or
receiving equipment designed to operate within its frequency
range and RF power handling limitations.
Installation: The location of the NT-66095
antenna onboard ship should be selected to provide maximum
unobstructed coverage within the physical constraints of the
ship's structure. Propagation in this portion of the
spectrum is generally line-of-sight, therefore, an tennas
that are masked by ship's structures produce limited
coverage in azimuth and/or elevation.
Considerations: This antenna is not a broadband
type and as such has maximum operating efficiency at its
resonant frequency. The antenna's efficiency will decrease
proportionally as the operating frequency is moved from
resonance. |
