| OE-415(V)1/SRC |
|
| Physical
Dimensions |
Antennas |
| Height |
420
inches |
| Diameter |
7.5
inches at base, tapering |
| Weight |
204
lbs (each antenna) |
|
Matching
Network |
| Height |
17
- 1/4 inches |
| Width |
38
- 1/2 inches |
| Depth |
32
- 1/4 inches |
| Weight |
140
lbs |
| Operating
Temperature |
-54
C to +65 C |
| Wind |
100
knots |
|
|
| Frequency
Range |
4
to 12 MHz
|
| Input
Impedance |
50
ohms |
| VSWR |
>
3:1 |
| Polarization |
Vertical |
| RF
Power Rating |
10
kilowatts (average) |
| Gain |
2
dBi |
| Feed
Type |
Unavailable |
| Input
Connector |
Unavailable |
|
|
Description:
Twin-whip antenna group installed on DDG-51 Class ships that
provides high-power, broadband coverage for military
communications equipment in the 4 - 12 MHz frequency band.
It is omnidirectional, vertically polarized, and is
particularly suited for prolonged use in marine shipboard
environments.
The assembly consists of
two 35-foot whip antennas, (AS-3772 A/U); an impedance
matching network, and an interconnecting wire-rope feed
assembly, MX-18328/SRC. Each whip has a 3-section aluminum
radiator, a fiberglass base insulator, and a mounting base.
The spun aluminum radiators taper from 7.5 inches at the
base to 2 inches at the top. Dynamic dampers within each
radiator section effectively damp natural vibrations of the
structure at frequencies encountered above Navy vessels.
The two whips are mounted
10 feet apart atop a platform on the ship's forward stack.
The matching network, enclosed in a weatherproof aluminum
housing, mounts on the platform surface midway between the
antennas. Each whip connects to the network feed insulators
using the wire-rope feed assembly.
Fixed-tuned,
inductor/capacitor, matching elements are provided in the
network box to optimize its VSWR characteristics over the 4
- 12 MHz band for the antenna group on the DDG-51 Class
ships. For other mounting sites, these characteristics will
vary and other values or electrical configurations can be
supplied to meet the installer's requirements. Coaxial
connection to a transmission line from associated equipment
is made by means of 1.625-inch, EIA, end terminal, 90°
elbow, and reducer at the network box. |
